Toast|Cancel button

The TOAST|CANCEL button surround will illuminate white for up to 30 seconds when the appliance is turned on. The toaster will enter standby mode after 30 seconds if a button is not pressed or the browning control slide is not adjusted.

  • Press the TOAST|CANCEL button once to lower the carriage and start the toasting process. The TOAST|CANCEL button surround will then illuminate red.
  • Press the TOAST|CANCEL button during operation to cancel the toasting process or any other function. The TOAST|CANCEL button illumination will change from red to white and stay illuminated for up to 30 seconds before entering standby mode.

A Bit More™ button

If your toast comes up too light, one press of this button adds a little extra toasting time. This feature can be selected before, during or after the toasting cycle and can be used with the BAGEL and FROZEN functions.

To use this feature during the toasting cycle
Press the A BIT MORE™ button. The button surround will illuminate white when selected. The toasting time will automatically increase but will not illuminate more of the LED toasting progress indicator. The A BIT More™ function can be cancelled by pressing the A BIT MORE™ button again and the original toasting cycle will continue.

To use this feature before or after the toasting cycle
Press the A BIT MORE™ button. The button surround will illuminate white when selected. The carriage will automatically lower and begin the additional toasting time. The LED toasting progress indicator will automatically align with the lowest browning setting then flash and count down for the additional browning time.

Lift and Look™ button

This feature automatically raises and lowers the carriage so you can check the toasting progress without interrupting and/or cancelling the toasting cycle.

1. The LIFT and LOOK™ button surround will illuminate white during the toasting cycle and when using the A BIT MORE™, BAGEL and FROZEN features. You can press the LIFT and LOOK™ button during the toasting cycle to view the toasting progress. If selected, the LIFT and LOOK™ button surround will flash. The LED toasting progress indicator will cease to flash indicating that the selected toasting cycle time has not been interrupted. When the LIFT and LOOK™ cycle has finished, the toasting cycle will recommence, indicated by the resumed flashing of the LED toasting progress indicator.

2. Approximately 10 seconds before the end of the selected browning setting, the LIFT and LOOK™ button will cease illumination and cannot be activated during this time.

NOTE: Toasting can be stopped at any time, even during the LIFT and LOOK™ cycle, by pressing the TOAST|CANCEL button. This will cancel the operation and the carriage will move to the raised position.

Bagel button

This feature activates additional heat to the middle heating elements to perfectly toast the insides of your cut bagel without burning the outside.

To toast bagels
1. Place the cut bagel into the toasting slots with the inside of the bagel facing inwards as per the bagel markings above the middle heating elements of the toaster.

2. Select the desired browning setting by adjusting the browning control slide on the front of the toaster. There are 12 browning settings ranging from ’1′ (lightest) to ’5′ (darkest).

3. To select the BAGEL setting, press the BAGEL button and the button surround will illuminate white. To start the toasting process, press the TOAST|CANCEL button which will illuminate red. The bagels will automatically lower into the toasting slots. The middle and side heating elements will automatically adjust.

NOTE: It is normal for the outside heating elements to appear off or on a lower power during the bagel setting. This ensures the inside of your cut bagel toasts without burning the outside.

4. After the cycle has finished, press the BAGEL button to deselect the setting.

Toast Ready alert

A toast ready alert will sound when the toasting cycle has finished and the carriage has risen and locked into the raised position. The default volume setting for the toast ready alert is ‘High’ but can be adjusted to ‘Low’ or ‘Mute’.

Adjusting the volume of the Toast Ready Alert
Press and hold down the LIFT & LOOK™ button for 2 seconds until the A BIT MORE™, BAGEL, and FROZEN buttons illuminate white. While these buttons are illuminated, adjust the volume as follows:
Mute – Press the FROZEN button. The button surround light will flash three times.
Low – Press the BAGEL button. The toaster will beep three times with low volume.
High – Press the A BIT MORE™ button. The toaster will beep three times with high volume.