Setting the ‘CLOCK SET’ feature

Setting the clock is optional. When the clock is set, the time will appear on the LCD screen.

1.Press the ‘MENU’ button. The menu programming options will appear on the LCD screen with a blinking indicator on ‘CLOCK SET’.
2.Press the ‘OK’ button. The hour will blink, indicating that the hour is ready to be set.
3.Press the 'Up arrow' or 'Down arrow' button to reach the appropriate hour. If the hour has passed 12, the indicator switches from AM to PM.
4.Once the appropriate hour is reached, press the ‘OK’ button. The minutes will blink, indicating that the minutes are ready to be set.
5.Press the 'Up arrow' or 'Down arrow' button to reach the appropriate minute.
6.Once the appropriate minute is reached, press the ‘OK’ button. The LCD screen will return to the menu programming options.
7.To exit the menu programming options, press the ‘MENU’ button. Alternatively, press the button to reach ‘EXIT MENU’ and press the ‘OK’ button. The LCD screen will return to the main screen and indicate the time selected.

NOTE: If power is interrupted to the Brewer, the clock will need to be reset. Programmed brew size and brew temperature settings are remembered and restored automatically. All other settings will be restored automatically after the clock is reset.

Setting the ‘ON-OFF TIME’ feature

This feature allows you to program a specific time that the Brewer will automatically turn on and/or off. By programming your Brewer to automatically turn on, you will not have to wait for the Brewer to heat the water in the Water Tank. It will take the Brewer approximately 3½ minutes to heat the water from room temperature.

NOTE: You must set the clock in order to use the ‘ON-OFF TIME’ feature.

1.
Press the ‘MENU’ button. The menu programming options will appear on the LCD screen with a blinking indicator on ‘CLOCK SET’.
2.Press the 'Down arrow' button to reach ‘ON-OFF TIME’.
3.Press the ‘OK’ button.
4a.Press the 'Up arrow' or 'Down arrow' button to see the two options:

a) ‘ON-OFF TIME’ will be ‘INACTIVE’, indicating that the Brewer will not turn on or off automatically. Press the ‘OK’ button to select this option. The LCD screen will return to the menu programming options.
4b.b) 'ON-OFF TIME’ will be ‘ACTIVE’, indicating the Brewer will automatically turn on and/or off according to the specific times you set. Press the ‘OK’ button to select this option.
5.The LCD screen will display ‘ON TIME’, indicating that the time you wish the Brewer to automatically turn on is ready to be set. The hour will blink, indicating that the hour is ready to be set.
6.Press the 'Up arrow' or 'Down arrow' button to reach the appropriate hour. If the hour has passed 12, the indicator switches from AM to PM.
7.Once the appropriate hour is reached, press the ‘OK’ button. The minutes will blink, indicating that the minutes are ready to be set.
8.Press the 'Up arrow' or 'Down arrow' button to reach the appropriate minute.
9.Once the appropriate minute is reached, press the ‘OK’ button. The LCD screen will display ‘OFF TIME’, indicating that the time you wish the Brewer to automatically turn off is ready to be set.
10.Repeat the instructions for Setting the ‘ON TIME’ (Steps 6. through 9.) for 'OFF TIME'.
11.Once the appropriate time is reached, press the ‘OK’ button. The LCD screen will return to the menu programming options.
12.To exit the menu programming options, press the ‘MENU’ button. Alternatively, press the button to reach ‘EXIT MENU’ and press the ‘OK’ button. The LCD screen will return to the main screen and indicate whether you have activated the ‘ON-OFF TIME’ feature.

NOTE: If you want to brew outside the ‘ON TIME’ and ‘OFF TIME’ selected, press and release the Power Switch on the lower back, right side of the Brewer to restore power. You will have to wait for the water to heat up before the Brewer is ready to brew.

An alternative to setting the ‘ON-OFF TIME’ feature is to leave the Brewer on all the time. We recommend this so your Brewer will always be ready to brew a fresh cup of gourmet coffee, tea, or hot cocoa.

To turn the Brewer off at any time, press and release the Power Switch on the lower back right side of the Brewer. The clock will remain on if set; however, you will not be able to activate the brew cycle.

Press and release the Power Switch again to restore power to the Brewer. You will have to wait for the water to heat up before the Brewer is ready to brew.

Setting the ‘AUTO OFF’ feature

This feature automatically turns the Brewer off after 2 hours from the last brew.

1.
  • Press the ‘MENU’ button. The programming options will appear on the LCD screen with a blinking indicator on ‘CLOCK SET’.
    2.Press the 'Down arrow' button to reach ‘AUTO OFF’.
    3.Press the ‘OK’ button.
    4.Press the 'Up arrow' or 'Down arrow' button to see the two options:
    4a.‘AUTO OFF’ will be ‘INACTIVE’ and the LCD screen will display ‘- - -’, indicating that the Brewer will not turn off automatically. Press the ‘OK’ button to select this option. The LCD screen will return to the menu programming options.
    4b.‘AUTO OFF’ will be ‘ACTIVE’ and the LCD screen will display ‘2 hr’, indicating the Brewer will automatically turn off after 2 hours. Press the ‘OK’ button. The LCD screen will return to the menu programming options.
    5.To exit the menu programming options, press the ‘MENU’ button. Alternatively, press the 'Down arrow' button to reach ‘EXIT MENU’ and press the ‘OK’ button. The LCD screen will return to the main screen and indicate whether you have activated the ‘AUTO OFF’ feature.

    Setting the ‘BREW TEMP’ feature

    The Brewer brews coffee at a preset temperature of 192°F. You can adjust this temperature down by 5°F if you prefer a cooler cup of coffee, tea, or hot cocoa.

    1.Press the ‘MENU’ button. The programming options will appear on the LCD screen with a blinking indicator on ‘CLOCK SET’.
    2.Press the 'Down arrow' button to reach ‘BREW TEMP’.
    3.Press the ‘OK’ button. The LCD screen will indicate the default brew temperature, 192°F or the pre-programmed brew temperature.
    4.Press the 'Up arrow' or 'Down arrow' button to reach the appropriate brew temperature. The temperature can only be set between 187°F and 192°F.

    NOTE: The Brewer will remain at the selected temperature for subsequent brews.

    Setting the ‘BREW SIZE’ feature

    This feature allows you to avoid scrolling through brew sizes if a particular size is chosen most often.

    1.Press the ‘MENU’ button. The menu programming options will appear on the LCD screen with a blinking indicator on ‘CLOCK SET’.
    2.Press the 'Down arrow' button to reach ‘BREW SIZE’. Press the ‘OK’ button. The LCD screen will indicate the default brew size of 7.25 oz.
    3.Press the 'Up arrow' button to go up in size or the 'Down arrow' button to go down in size. Select from

    • a stronger small cup (5.25 oz. serving)

    • a small mug (7.25 oz. serving)

    • a large mug (9.25 oz. serving)

    • a travel mug (11.25 oz. serving)

    • the iced beverage setting (3.25 oz. serving)

    NOTE: To use the iced beverage setting, place a tall glass filled with ice on the Drip Tray. Use your favorite K-Cup® and select the iced beverage brew size button. Add more ice once brewing is complete. Add cream and sugar if desired.
    4.Once the brew size is selected, press the ‘OK’ button. The LCD screen will return to the menu programming options.
    5.To exit the menu programming options, press the ‘MENU’ button. Alternatively, press the 'Down arrow' button to reach ‘EXIT MENU’ and press the ‘OK’ button. The LCD screen will return to the main screen and indicate the brew size selected.