1. Insert the power plug into a 110/120V power outlet. The TOAST/CANCEL button surround will illuminate in white. The LED toasting progress indicator will illuminate in red from left to right, hen align to the selected browning setting (indicated by the position of the browning control slide). The toaster will revert to stand-by mode after 30 seconds if a button is not pressed or the browning control slide is not adjusted.

2. Place 1 slice of bread, 1 bagel or half an English muffin only, into each of the toasting slots. Ensure items for toasting are not too large or too thick to fit in the toasting slots.

3. Select the desired browning setting by adjusting the browning control slide on the front of the toaster. The browning settings range from ‘1’ (lightest) to ‘5’ (darkest). The LED toasting progress indicator will illuminate in red and align to the selected browning setting (as indicated by the position of the browning control slide).

4. To start the toasting process, press the TOAST/CANCEL button on top of the toaster. The TOAST/CANCEL button surround will illuminate in red and the carriage will automatically lower into the toasting slots which starts the toasting cycle. As the carriage automatically locks into position, the ‘LIFT & LOOK’™ button surround will illuminate in white and the LED toasting progress indicator (above the selected browning setting) will flash and start to gradually count down (towards the left) indicating the toasting progress.

5. The ‘LIFT & LOOK’™ button can be pressed up until 10 seconds before the end of the toasting cycle to view the browning of the bread. When selected, the ‘LIFT & LOOK’™ button surround will flash and the LED toasting progress indicator will remain steady (indicating that the selected browning setting has not been interrupted by the carriage rising). The toasting recommences immediately as the carriage lowers and locks into position, and as indicated by the ‘LIFT & LOOK’™ button surround illuminating and the LED toasting progress indicator flashing.

6. Approximately 10 seconds before the end of the selected browning setting, the ‘LIFT & LOOK’™ button will cease illumination. As the toasting stops and the carriage rises, the TOAST/CANCEL button surround will flash and the LED toasting progress indicator will cease flashing. The LED toasting progress indicator will re-illuminate to the previously selected browning setting.

7. Once the toasting cycle has completed and the carriage has risen and locked into the raised position, the toast ready alert will sound. Remove the toast. The TOAST/CANCEL button surround will re-illuminate in white for up to 30 seconds, ready for the next toasting cycle. The toaster will revert to stand-by mode after 30 seconds.

NOTE: The toaster will revert to stand-by mode after 30 seconds if a button is not pressed or the browing control slide is not adjusted. The TOAST/CANCEL button surround and LED toasting progress indicator will cease illumination. The toaster will re-activate from stand-by mode and the TOAST/CANCEL button surround and LED toasting progress indicator will illuminate when:
A. Any of the buttons are pressed.
B. The browning control slide is moved.