Your Breville Smart Oven® is made of the highest quality materials and was carefully designed and engineered to let you enjoy your baked goods for years to come.

However, as with any machine, it needs your care in order to operate as it is intended to. Please follow our care tips below.

Routine Maintenance

NOTE: Do not use abrasive cleansers, metal scouring pads, or metal utensils on any of the interior or exterior surfaces of the oven, including the Crumb Tray. Do not use abrasive cleansers, metal scouring pads, or metal utensils to clean any of the accessories as they may damage the porcelain enamel finish of the Baking Pan and Broil Rack or scratch the nonstick coating on the Pizza Pan.

Cleaning the interior

The walls on the inside of the oven feature a nonstick coating for easy cleaning. To clean any spattering that may occur while cooking, wipe the walls with a soft, damp sponge. A non-abrasive liquid cleanser or mild spray solution may be used to avoid buildup of stains. Apply the cleanser to the sponge, not the oven surface, before cleaning. Avoid touching the quartz heating elements.
USE EXTREME CAUTION WHEN CLEANING THE QUARTZ HEATING ELEMENTS. ALLOW THE OVEN TO COOL COMPLETELY, THEN GENTLY RUB A SOFT, DAMP SPONGE OR CLOTH ALONG THE LENGTH OF THE HEATING ELEMENT. DO NOT USE ANY TYPE OF CLEANSER OR CLEANING AGENT.
Let all surfaces dry thoroughly prior to inserting the power plug into a wall outlet and turning the oven ON.

Cleaning the outer body and door

Wipe the outer body with a soft, damp sponge. A non-abrasive liquid cleanser or mild spray solution may be used to avoid buildup of stains. Apply the cleanser to the sponge, not the oven surface, before cleaning.

To clean the glass door, use a glass cleaner or mild detergent and a soft, damp sponge or soft plastic scouring pad. Do not use an abrasive cleanser or metal scouring pad as these will scratch the oven surface.

Let all surfaces dry thoroughly prior to inserting the power plug into a wall outlet and turning the oven ON.

Cleaning the Crumb Tray

After each use, slide out the Crumb Tray and discard crumbs. Wipe the Tray with a soft, damp sponge. A non-abrasive liquid cleanser may be used to avoid buildup of stains. Apply the cleanser to the sponge, not the tray, before cleaning. Dry thoroughly.

To remove baked-on grease, soak the Crumb Tray in warm soapy water, then wash with a soft sponge or soft plastic scouring pad. Rinse and dry thoroughly.

Always ensure that you reinsert the Crumb Tray into the oven after cleaning and prior to inserting the power plug into a wall outlet and turning the oven ON.

Cleaning the Wire Rack, Broil Rack, Baking Pan, and Pizza Pan

Wash all accessories in warm soapy water with a soft sponge or soft plastic scouring pad. For stubborn, baked-on grease, soak in warm soapy water then wipe with a soft sponge. Rinse and dry thoroughly. The Wire Rack, Broil Rack, Baking Pan, and Pizza Pan are also dishwasher-safe.

Cleaning and Changing the Light

To replace or clean the light, first remove the wire rack. The light is positioned on the left-hand side of the oven. Ensure that the oven has been off and unplugged for some time so ensure that the light is cool. Place your fingers on the outside ridge of the oven, pull the rear side out then the front side out gently. Soak the glass in hot soapy water and wash with a soft cloth. When clean, rinse and dry thoroughly. Replace the metal clip on the end of the glass, the clip side will face towards the front of the oven when replaced. Put the back of the clip into the holder and press the front in gently but firmly until it clicks into place. When changing the bulb, follow the same steps to remove the glass cover and replace the bulb.