• Place the base of the juicer on a flat dry surface.
  • Place the filter bowl surround on top of the motor base.
  • Align the arrows on the back of the stainless steel filter basket with the arrows on the motor drive and push down until it clicks in to place ensuring a secure fit has been created.
  • Place the juicer cover over the filter bowl surround, positioning the lower part of the feed chute over the stainless steel filter basket.
  • Raise the safety locking arm up and lock it into the two grooves on either side of the juice cover. The arm should not be in the vertical position and locked into place on top of the juice cover.
  • Slide the food pusher down the food chute by aligning the groove in the food pusher with the small protrusion on the inside of the top of the feed chute.
  • Place the pulp container into position by tilting and lifting the motor base slightly. Insert the pulp container under the juicer cover on the left hand side ensuring it is supported by the juicer cover and motor base.
  • Place the juice jug under the juice spout and place the lid onto the jug to avoid spatter.
  • Unwrap the cord and plug into a standard 110/120V wall outlet.