Advanced Functions

Press & HoldFunction
1 CUPPress & hold 1 CUP button to deliver water to the group head at full pump pressure and release button to stop extraction.

This by-passes the pre-infusion step and delivers water to the group head at the full 9 bar pressure. This function can be used when purging the group head.
2 CUPPress & hold 2 CUP button to deliver water to the group head at full pump pressure and release button to stop extraction.

This by-passes the pre-infusion step and delivers water to the group head at the full 9 bar pressure. This function can be used when purging the group head.
MANUALPress & hold the MANUAL button to deliver water to the group head at low pre-infusion pressure. When MANUAL button is released, water will continue at the full 9 bars of pressure. Press MANUAL button again to stop extraction.

This function can be used to manually control the pre-infusion duration.

Advanced Programming

AdjustmentFunction
Pre-Infusion ProgrammingPress the UP and DOWN arrows together to enter the PRE-INFUSION programming mode. Press the MENU button to move between Pre-Infusion Duration and Pre-Infusion Power.
Pre-Infusion DurationThe LCD will display the current Pre-Infusion Duration. Press UP or DOWN arrows to adjust the time. Press EXIT to set the new duration.
Pre-Infusion PowerThe LCD will display the current Pre-Infusion Power as a percentage of total pump power. Press the UP or DOWN arrows to vary the power. Press the EXIT button to set the new Pre-Infusion Power.
Temperature Unit - F°/C°Press the POWER buton to switch the machine OFF. While holding the DOWN arrow, press the POWER button. The LCD will now display the current temperature unit (F° or C°). Press the UP or DOWN arrow to adjust to the desired temperature unit. Press the EXIT button to set the new unit.
Machine AudioThis refers to the volume of the 'beeps' heard.
- HI - High volume
- LO - Low volume
- OFF - No volume

Press the POWER button to switch the machine OFF. while holding the UP arrow, press the POWER button. The LCD will display the current audio volume. Press the UP or DOWN arrow to adjust the volume level. Press EXIT to set the new volume.