• Always check the water level before use and replace water daily. Use cold, preferably filtered water. Do not use mineral or distilled water or any other liquid.
  • The amount of espresso extracted in toe cup will vary depending on your grind size and dose amount.
  • Pressing the 1 CUP or 2 CUP button during a preset shot volume will immediately stop the extraction.
  • Default settings: 1 CUP shot volume is approximately 1oz./30ml. 2 CUP shot volume is approximately 2 oz./60ml.
  • Water is automatically released into the drip tray after the steam and hot water functions to ensure the thermocoil is at the optimal temperature setting for extracting espresso. This is normal. If you find water around the front of the machine, ensure the drip tray is firmly pushed in place after using the steam and/or hot water functions.
  • The machine automatically switches to SLEEP MODE after 1 hour. During this time, the POWER button light will flash slowly. After 3 hours the machine will switch to AUTO OFF MODE. To re-activate the machine, press any button except for the POWER button. The POWER button light will flash while the machine re-heats. A pumping sound will be heard, this is normal. When the machine has reached the correct operating temperature, the POWER button light will stop flashing and all button lights on the control panel will illuminate.