Assembling the Handy Stand Mixer™

  1. Place the mixer on a level dry surface such as a bench top. Ensure that both the hand mixer (mixer head) and the bowl motor dial is in the off position.
  2. Attach the mixer head to the mixer stand by aligning the two (2) pins in the top of the stand with the two (2) slots located in the base of the hand mixer. Allow the hand mixer to slot into place. You will hear a locking noise which indicates that the hand mixer is in place.

NOTE: Make sure that the hand mixer is securely attached to the stand before using.

Attaching the Bowl

The stainless steel bowl can now be attached to the mixer stand. Place the bowl into the turntable and turn it to the RIGHT (clockwise) until it locks into place. (Product graphic on the stand will show this).

Attaching the Beaters

  1. Press the TILT button and lift the hand mixer up until it stops.
  2. Insert the beaters into the correct socket as shown on the front panel of the mixer head. The beaters should be inserted with a firm push until they click into place.
    NOTE: It is important that the two beaters are fully inserted into their appropriate sockets or your Handy Stand Mixer™ will not operate correctly.

CAUTION

Beaters/dough hooks must be inserted into the correct sockets as they are not interchangeable and incorrect insertion will result in damage.

Attaching the Dough Hooks

  1. Press the TILT button and lift the hand mixer up until it stops.
  2. Insert the dough hooks into the correct socket as shown on the underside of the mixer head. The dough hooks should be inserted with a firm push until they click into place.
    NOTE: It is important that the two dough hooks are fully inserted into their appropriate sockets or your Handy Stand Mixer™ will not operate correctly.